Fuel and Diesel Injector Filters
Starting from the R&D stage of a product at an experimental level, up to a large-scale production, GVS has acquired today vast experience in the market. GVS has become an international leader in the production of high volume products for low, medium and high pressure gasoline and diesel injector systems.
GVS offer a wide range of filtration media ranging from 8 to 100 micron pore sizes and filter screens in materials such as PA, PE, PPS, PEEK and stainless steel to suit a diverse range of automotive applications.
The experience acquired in this division enables GVS to offer innovative solutions and enables increased filter surfaces in extremely small spaces. This allows specifications to be met at smaller form factors or performance to be increased by up to 30%. To ensure this higher performance is maintained the entire production process of the product takes place in class 100,000 clean rooms on fully automatic equipment.
ABS / ESP - Braking Filters
Antilock Brake systems prevent wheels from locking and skidding when braking hard or when braking on wet or slick surfaces. This adds a significant margin of safety allowing the driver to maintain steering control while trying to stop. Depending on conditions, on dry streets antilock brake systems can slightly increase braking distances, while, on wet or slick pavement, antilock brakes may reduce the stopping distance up to 25% or more.
ABS has been significantly developed and recent versions have quite a few different functions in addition to the main brake assist one, such as traction control (TCS) and electronic stability control (ESP).
When any of the rotating wheels begin to slow at a faster rate than the others, the ABS system, which continuously monitors the rotation of the wheel speed during braking with sensors, responds by briefly decreasing the pressure on the braking circuit through electrically operated solenoid valves. This reduces the braking force on that wheel, allowing it to regain traction and not allowing it to lock, hence bringing it in line with the others.
GVS has developed advanced filter solutions for the ABS-ESP valves with hydraulic circuit oil to ensure the wheel speed sensors do not become contaminated with metallic dust and fail to detect wheel slip.
Every year GVS produce up to 250million zero defect over moulded filters in a range of styles with innovative production technology. This is certainly a good reference for every new ABS/ESP project.
The GVS Automotive product production areas are 100,000 class clean room standard. This guarantees levels of cleanliness in line with required standards where specified particles ranges are not allowed. The standard filtering materials in PA, PPA, PEEK and stainless steel cover most product specifications, while research and technological development allow new solutions to be obtained by improving the performance of the products and reduced unit production costs. GVS has always believed in re-investing in technology and the latest production equipment. Year on year this has meant an average increase in total output of 25%.
Steering and Transmission Filters
The GVS high tech. and innovative design capacity allow us to solve all our customers challenges, especially when the elements are to be used or inserted in limited space.
GVS's wide range of media covers pore sizes from 10 to 190 microns. The Automotive division also works with other areas of GVS that specialise in other market sectors to offer the most innovate and efficient solutions to each design problem.
Historically a firm leader in high volume filter production through the strength of it's automatic production systems, GVS now has the flexibility to run projects for low and medium volumes.
Fuel Tank Filters
This is an application sector where over the years GVS has introduced new solutions and considerably improved the standards of reference. GVS's highly innovative design skills provide solutions to a wide range of different filtering problems put forward by the clients, especially inserting the filter in very small spaces, optimizing the performances of the final product without compromises on filter specification.
GVS's wide range of media covers pore sizes from 10 to 190 microns. The Automotive division also works with other areas of GVS that specialise in other market sectors to offer the most innovate and efficient solutions to each design problem. These media's and designs can be tested at R&D stage through rapid prototyping where required.
With support of the internal GVS Filter testing laboratory, GVS can quickly process high performance non woven filter medias. These media's are consistently amongst the best performing on the market. GVS Prefilters and Fine Filters are used in fuel tank modules and a range of other applications.
The strong cross technology that has always distinguished the various areas of development enables GVS to propose filtering materials and innovative designs to increase performances and reduce the costs of their final products.
The leader in high production volumes with fully automatic overmolding processes, GVS today is highly flexible also in applications of medium and low volumes, exploring the new markets though new production plants in developing countries.
Ventilation Membrane - Breathing Filters
With a production exceeding 3.4 billion pieces manufactured in the last 10 years and more than 600 million filters manufactured in one year alone, GVS is a world leader in the production of injection-moulded ventilation filters.
The applications range from temperature, water and oil sensors, electronic power boxes, ABS control, electric windscreen wipers, lighting systems to the whole innovative mechatronics with IP specifications. More than 60 different types of membranes allow GVS clients to choose the best solution in terms of performance, quality and price.
GVS's experience of industrial production in the membrane sector dates back 35 years. In the early stages major technological investments and a wide range of innovative patents allowed GVS to confront the leaders of the sector with confidence. Today GVS has become the market's main point of reference for very high volume production..
Throttle body / Drive by Wire technology
For more than 15 years, since GVS took over a production line of M. Marelli, a division of GVS Automotive has been specializing in the production of components for throttle body application.
By applying the GVS philosophy and investing in new technologies, GVS has become a leader in the manufacture of throttle plates in aluminium, brass and special alloys. Today GVS has production lines for throttle plates installed in GVS production locations on the 4 continents in Italy, Brazil, US and China
GVS has recently expanded its range of products for throttle bodies, with a special three-year investment plan for the expansion of the Brazil factory, specializing in the production of drive by wire gears, shafts and over moulded components.
In order to guarantee the required tolerances, the temperature in the GVS production areas is controlled to cut down heat expansion. If left to vary these changes in temperature would otherwise lead to an increase in the working tolerances. The great experience accumulated by GVS over the years in the internal design of the production systems enables them to easily maintain the high precision required by the valves (+/- 4 micron) at the level of industrial production.
Constantly seeking further improvement in performance and costs, GVS is now developing valves for throttle bodies with innovative materials, in plastic alone, plastic and metal combinations, as well as other innovative solutions.
SCR Tecnology - UREA Filter and ventilation/breathing filters line
GVS has developed a new line of filters, available worldwide, to suit the latest requirements of heavy duty commercial vehicles fitted with NOx gas after treatments.
SCR systems (Selective Catalyst Reduction) represent the main NOx reduction technology. The SCR dosing control unit feeds into the exhaust gas flow of the catalytic converter a reduction agent called AdBlue®, a chemical synthetic aqueous solution with a 30% urea content (AdBlue®), transforming the nitrous oxides into water and harmless nitrogen GVS filters are able to cover all of the SCR process needs to meet the automotive manufacturers performance requirements for quality, efficiency, and durability.
With support of the internal GVS Filter testing laboratory, GVS can quickly process high performance non woven filter medias for this application. These media's are consistently amongst the best performing on the market.