To access the localized content, select the website associated with the Division of your interest:

Health & Safety

    Healthcare & Life Sciences

      Energy & Mobility

        • 13 mm - ABLUO Syringe Filters, image 1
        • 13 mm - ABLUO Syringe Filters, image 2
        • 13 mm - ABLUO Syringe Filters, image 3

        13 mm - ABLUO Syringe Filters

        Rapid filtration of aqueous and organic solutions.

        High quality membranes for the elimination of contaminants.

        Low volume of liquid retained and greater effective filtration area.

        Attachments

        Sample Preparation Catalog
        TDS TDS FJ13ANCCA002DD01, FJ13ANCCA004FD01
        TDS FJ13BNPNC002AD01, FJ 13BNPNC004AD01
        TDS FJBNPNY002AD01, FJBNPNY004AD01
        TDS FJ13BNPPE002AD01, FJ13BNPPE005AD01
        TDS FJ13BNPPH002AD01, FJ13BNPPH004AD01
        TDS FJ13BNPPS002AD01, FJ13BNPPS004AD01
        TDS FJ13BNPPT002AD01, FJ13BNPPT004AD01
        TDS FJ13BNPPV002AD01, FJ13BNPPV004AD01
        TDS FJ13BNPRC002AD01, FJ13BNPRC004AD01

        Ask for information

        Properties

        Excellent yield and sample preparation speed.

        Reduced volume of liquids retained thanks to an adequate design of the flow channel and a lower spacing between the supports inside the casing for better handling of small volumes of samples or expensive samples.

        Operating pressure up to 75 psi thanks to overmoulding which prevents sample leaks from solder points and prevents the filter unit from exploding.

        Accurate quality control: The integrity of the syringe filters is tested to ensure adequate sealing and sealing of the filter to eliminate any possible filter by-pass.

        Accurate Labeling: Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in the original packaging.

        Modified acrylic housing to support the membrane in both directions, allowing for the injection or aspiration of samples.

        Characteristics

        Membrane Materials
        Cellulose Acetate, Nitrocellulose, Nylon, PE, PES, PTFE, PVDF, Regenerated Cellulose
        Housing Diameter
        18 mm
        Membrane Diameter
        13 mm
        Effective Filtration Area
        0.76 cm²
        Housing Materials
        Acrylic and Polypropylene
        Inlet/Outlet
        FLL/MLL-MLS

        Applications

        • Filtration of Aqueous, Organic and Alcohol Solutions
        • IC Chromatography
        • Fuel, Hydraulic Fluids and Machined Parts
        • Clarification
        • Protein Chemistry
        • Cell Culture

        Product Variants

        Multiple versions of 13 mm - ABLUO Syringe Filters are available.

        Product Variants

        21 available results

        1. FJ13ANCCA002DD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLL Cellulose Acetate. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Box quantity
          500
          Bubble point - typical (psi using water)
          45
          Color
          Blue
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer lock
          Membrane material
          Cellulose Acetate
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Weight (g)
          1.86
        2. FJ13ANCCA004FD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLL Cellulose Acetate. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          33
          Box quantity
          500
          Bubble point - typical (psi using water)
          27
          Color
          Yellow
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer lock
          Membrane material
          Cellulose Acetate
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          33
          Weight (g)
          1.86
        3. FJ13ANCCA008ED01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLL Cellulose Acetate. 0.80 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          30
          Box quantity
          500
          Bubble point - typical (psi using water)
          12
          Color
          Green
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer lock
          Membrane material
          Cellulose Acetate
          Pore size (µm)
          0.8
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          30
          Weight (g)
          1.86
        4. FJ13ANCCA012CD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLL Cellulose Acetate. 1.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          45
          Box quantity
          500
          Bubble point - typical (psi using water)
          10
          Color
          Red
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer lock
          Membrane material
          Cellulose Acetate
          Pore size (µm)
          1.2
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          45
          Weight (g)
          1.86
        5. FJ13ANCCA050PD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLL Cellulose Acetate. 5 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          77
          Box quantity
          500
          Bubble point - typical (psi using water)
          5
          Color
          Brown
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer lock
          Membrane material
          Cellulose Acetate
          Pore size (µm)
          5
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          77
          Weight (g)
          1.86
        6. FJ13BNPNC002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLS Nitrocellulose. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          8
          Box quantity
          500
          Bubble point - typical (psi using water)
          47
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Acrylic
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          Nitrocellulose
          Pore size (µm)
          0.2
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          8
          Weight (g)
          1.43
        7. FJ13BNPNC004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. Acrylic FLL/MLS Nitrocellulose. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Box quantity
          500
          Bubble point - typical (psi using water)
          27
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          Nitrocellulose
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Weight (g)
          1.43
        8. FJ13BNPNY002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Nylon. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          10
          Box quantity
          500
          Bubble point - typical (psi using water)
          45
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          NY66
          Notes
          Ideally for use in general filtration and uHLPC sample preparation of aqueous, solvent-based and organic solutions prior to chromatography or other instrument analyses; Excellent chemical compatibility with esters, bases, and alcohols; Biological sample preparation; High protein binding capacity: Immobilizes antigens, antibodies and other protein
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          10
          Weight (g)
          1.43
        9. FJ13BNPNY004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Nylon. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          17
          Box quantity
          500
          Bubble point - typical (psi using water)
          31
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          NY66
          Notes
          Ideally for use in general filtration and HLPC sample preparation of aqueous, solvent-based and organic solutions prior to chromatography or other instrument analyses; Excellent chemical compatibility with esters, bases, and alcohols; Biological sample preparation; High protein binding capacity: Immobilizes antigens, antibodies and other protein
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          17
          Weight (g)
          1.43
        10. FJ13BNPPE002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyethylene. 0.20 µm
          Box quantity
          500
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane diameter
          13
          Membrane material
          Polyethylene
          Notes
          An "Universal" Filter for all analytical filtration requirements; For aqueous and aggressive organic solvent filtration. Highly recommended for filtering HPLC samples: HPLC sample preparation requiring low detection levels; Wide application in sample preparation; Ion chromatography
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Weight (g)
          1.43
        11. FJ13BNPPE005AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyethylene. 0.45 µm
          Box quantity
          500
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane diameter
          13
          Membrane material
          Polyethylene
          Notes
          An "Universal" Filter for all analytical filtration requirements; For aqueous and aggressive organic solvent filtration. Highly recommended for filtering HPLC samples: HPLC sample preparation requiring low detection levels; Wide application in sample preparation; Ion chromatography
          Pore size (µm)
          0.5
          Pressure (bar)
          5
          Weight (g)
          1.43
        12. FJ13BNPPH002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polytetrafluoroethylene Hydrophilic 0.22
          Diameter (mm)
          13.00
          Hydrophobic
          No
          Max Operating Pressure
          80 psi
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Box quantity
          500
          Bubble point - typical (psi using water)
          17
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PTFE
          Notes
          Preparation of organic solutions prior to chromatography or other instrument analyses; Exceptional chemical and temperature compatibility; Filtration of strong acids and aggressive solutions. Venting applications. Ideal for filtration of gas and/or HPLC organic solvents, aggressive solutions and small venting; Ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials;For solvents (acetone, dimethylformamide,DMSO....) or for aggressive aqueous liquids
          Pore size (µm)
          0.22
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Weight (g)
          1.43
        13. FJ13BNPPH004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polytetrafluoroethylene Hydrophilic 0.45
          Diameter (mm)
          13.00
          Hydrophobic
          No
          Max Operating Pressure
          80 psi
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Box quantity
          500
          Bubble point - typical (psi using water)
          17
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PTFE
          Notes
          Preparation of organic solutions prior to chromatography or other instrument analyses; Exceptional chemical and temperature compatibility; Filtration of strong acids and aggressive solutions. Venting applications. Ideal for filtration of gas and/or HPLC organic solvents, aggressive solutions and small venting; Ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials;For solvents (acetone, dimethylformamide,DMSO....) or for aggressive aqueous liquids
          Pore size (µm)
          0.45
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Weight (g)
          1.43
        14. FJ13BNPPS002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyethersulfone. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          8
          Box quantity
          500
          Bubble point - typical (psi using water)
          45
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PES
          Notes
          Ideally for use in life science applications; Preparation of aqueous, biological or protein based solutions prior to chromatography or other instrument analyses; Accurate results for the most sensitive analysis of ionic species; Specifically designed for IC applications; Low drug and protein binding for pharmaceutical filtration; The 0.2 µm syringe filters are optimized for UHPLC sample preparation
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          8
          Weight (g)
          1.43
        15. FJ13BNPPS004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyethersulfone. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Box quantity
          500
          Bubble point - typical (psi using water)
          31
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PES
          Notes
          Ideally for use in life science applications; Preparation of aqueous, biological or protein based solutions prior to chromatography or other instrument analyses; Accurate results for the most sensitive analysis of ionic species. Specifically designed for IC applications; Low drug and protein binding for pharmaceutical filtration; The 0.45 µm syringe filters are optimized for UHPLC sample preparation
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          12
          Weight (g)
          1.43
        16. FJ13BNPPT002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polytetrafluoroethylene. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Box quantity
          500
          Bubble point - typical (psi using water)
          17
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PTFE
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Weight (g)
          1.43
        17. FJ13BNPPT004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polytetrafluoroethylene. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          23
          Box quantity
          500
          Bubble point - typical (psi using water)
          11
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PTFE
          Notes
          Preparation of organic solutions prior to chromatography or other instrument analyses; Exceptional chemical and temperature compatibility; Filtration of strong acids and aggressive solutions. Venting applications. Ideal for filtration of gas and/or HPLC organic solvents, aggressive solutions and small venting; Ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials;For solvents (acetone, dimethylformamide,DMSO....) or for aggressive aqueous liquids
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          23
          Weight (g)
          1.43
        18. FJ13BNPPV002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyvinylidene Fluoride. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          13
          Box quantity
          500
          Bubble point - typical (psi using water)
          51
          Color
          Transparent
          Effective filtration area (cm²)
          0.76 cm2
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PVDF
          Notes
          Sterilizing and clarifying filtration of biological solutions; Preparation of protein-containing solutions prior to chromatography or other instrument analyses; Useful for a wide range of applications, including aggressive and non-aggressive solvent-based mobile phase; Offers excellent chemical compatibility, even with aggressive acids and alcohols. Provides high flow rates and throughput, low extractables and broad chemical compatibility; The 0.2 µm pore size assures removal of the contaminant size most likely to plug a UHPLC column and offers significantly better protection of your analytical results
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          13
          Weight (g)
          1.43
        19. FJ13BNPPV004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Polyvinylidene Fluoride. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          50
          Box quantity
          500
          Bubble point - typical (psi using water)
          23
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          PVDF
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          50
          Weight (g)
          1.43
        20. FJ13BNPRC002AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Regenerated Cellulose. 0.20 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Box quantity
          500
          Bubble point - typical (psi using water)
          57
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          Regenerated Cellulose
          Pore size (µm)
          0.22
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          11
          Weight (g)
          1.43
        21. FJ13BNPRC004AD01
          ABLUO Syringe Filter NON-Sterile 13 mm diam. PP FLL/MLS Regenerated Cellulose. 0.45 µm
          Diameter (mm)
          13.00
          Max Operating Pressure
          80 psi
          Membrane diameter (mm)
          13
          Priming volume
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          15
          Box quantity
          500
          Bubble point - typical (psi using water)
          36
          Color
          Transparent
          Housing diameter (mm)
          18
          Housing material
          Polypropylene
          Inlet / outlet
          Female luer lock/Male luer slip
          Membrane material
          Regenerated Cellulose
          Pore size (µm)
          0.45
          Pressure (bar)
          5
          Typical water flow rate (mL/min at 15 psi & 23°C)
          15
          Weight (g)
          1.43

        This website uses first-party and third-party cookies in order to offer dynamic content and a better user experience. For further information please read our Privacy Policy.