To access the localized content, select the website associated with the Division of your interest:

Health & Safety

    Healthcare & Life Sciences

      Energy & Mobility

        • Filters Speedflow® Ultra, image 1

        Filters Speedflow® Ultra


        Speedflow® ULTRA is particularly suitable for filtration in every application in which an “ultrapure” fluid has to be obtained under higher flow rate and for large volumes.

        Speedflow ULTRA filter could work as a barrier to endotoxins and bacterial contaminants prior to IV medical administration.

        Ask for information


        • Vented case for a faster removal of air during priming
        • Wide range of connectors
        • Custom printing option - coloured housing available
        • Amber coloured housing for photosensitive drugs
        • Latex free, PVC free and free of animal substances


        59.0 x (75.0-100.0) x 25.4 mm (W x L x D)
        Filter Materials
        HI-FLO PES, PTFE
        Housing Material
        Clear Acrylic
        Pore Size
        da 0.2um a 5 um


        • Aqueous IV solutions
        • TPN preparation

        Product Variants

        Multiple versions of Filters Speedflow® Ultra are available.

        Product Variants

        1 available result

        1. RS075ACYR..A00
          Speedflow ULTRA 0.2, 1.2, 5.0 µm PES - IV Vented filter (PTFE)
          Filtration efficiency (%)
          Air flow
          400 cc/[email protected]
          Bacterial retention
          0.2 µm, 0.2 µm positive charged – 7LRV – Brevundimonas diminuta1.2 µm – Candida albicans
          Materials comply with USP class VI-121°C test, ISO 10993, REACH, RoHS
          Depth (mm)
          Drug compatibility
          Speedflow® ULTRA shows total compatibility with following drugs:5-FlourouracilAmphotericin BBupivacaine HCLDobutamine HCLDopamine HCLInsulinLidocaine HCLNitroglycerinPaclitaxelPiperacillinSodium Citrate
          Effective filtration area (cm²)
          PES: 60.0 PTFE 22.0
          Filtration efficiency
          Inlet / outlet
          Inlet: tube ID 4.8 x OD 6.8 Outlet: tube ID 4.8 x OD 6.8
          Length (mm)
          Materials of construction
          Filter media: Hydrophilic HI-FLO PES 0.2 µm and 0.2 µm positive charged, or 1.2 µm, and 5 µm Vent: Hydrophobic PTFE membrane 0.03 µm Housing: Clear Modified Acrylic
          Minimum water bubble point
          0.2 µm: 3.7-4.8 bar (54-70psi)1.2 µm: 0.7-1.0 bar (10-15psi)5.0 µm: 0.15-0.3 bar (2.2-4.5psi)
          Minimum water flow rate
          0.2 µm: 280 ml/min at 80cm (31.5”) head pressure1.2 µm: 1.08lt/min at 80cm (31.5”) head pressure5.0 µm: 2.04lt/min at 80 cm (31.5”) head pressure0.2 µm positive membrane: (pressure drop measured between inlet and outlet. flow on peristaltic pump)200 ml/min at 80cm (31.5”) head pressure420 ml/min at 255cm (100.4”) head pressure
          Self-priming instructionsFor fastest priming procedure. keep Speedflow ULTRA in vertical position with the two vents up. Filtration Capacity 150 lt during 6 hours. tested with fluid composed by 93.6% osmotized water + 6.4 dialysis additives
          Pressure (bar)
          2.0bar (29.00psi)
          Priming volume
          10.3 ml
          <0.25 EU/ml using the LAL test method
          Sterilization compatibility
          EtO or Gamma (25kGy)
          5 - 40°C
          Water breakthrough
          PTFE Hydrophobic membrane: 3.0bar (43.5psi)
          Weight (g)
          Width (mm)

        This website uses first-party and third-party cookies in order to offer dynamic content and a better user experience. For further information please read our Privacy Policy.