To access the localized content, select the website associated with the Division of your interest:

Health & Safety

    Healthcare & Life Sciences

      Energy & Mobility

        • Speedflow® Ultra, immagine 1
        • Speedflow® Ultra, immagine 2

        Speedflow® Ultra

        Speedflow® ULTRA è particolarmente adatto per la filtrazione in tutte le applicazioni in cui è necessario ottenere un fluido "ultrapuro" a velocità di flusso elevate e per grandi volumi.

        Il filtro Speedflow® ULTRA può funzionare come barriera alle endotossine e ai contaminanti batterici prima della somministrazione medica per via endovenosa.

        Richiedi informazioni

        Proprietà

        • Guscio ventilato per una più rapida eliminazione dell'aria durante il processo di priming
        • Ampia gamma di connettori
        • Opzione di stampa personalizzata - custodia colorata disponibile
        • Alloggiamento colorato in ambra per farmaci fotosensibili
        • Latex free, PVC free e privo di sostanze di origine animale

        Caratteristiche

        Dimensioni
        59.0 x (75.0-100.0) x 25.4 mm (W x L x D)
        Materiali Filtranti
        HI-FLO PES, PTFE
        Materiale Involucro
        Acrilico Trasparente
        Dimensioni Pori
        da 0.2µm a 5µm

        Applicazioni

        • Soluzioni IV acquose
        • Preparazione TPN

        Varianti Prodotto

        Speedflow® Ultra è disponibile in più versioni, scopri tutte le varianti disponibili.

        Varianti Prodotto

        4 risultati disponibili

        1. RS075ACYCH002A00
          Speedflow ULTRA 0.2µm, Positive, PES - IV Vented Adult Filter (PTFE)
          Filtration Efficiency
          100%
          Air flow
          >400 cc/[email protected]
          Bacterial retention
          0.2 µm, 0.2 µm positive charged – 7LRV – Brevundimonas diminuta1.2 µm – Candida albicans
          Biosafety
          Materials comply with USP class VI-121°C test, ISO 10993, REACH, RoHS
          Depth (mm)
          25.4
          Drug compatibility
          Speedflow® ULTRA shows total compatibility with following drugs:5-FlourouracilAmphotericin BBupivacaine HCLDobutamine HCLDopamine HCLInsulinLidocaine HCLNitroglycerinPaclitaxelPiperacillinSodium Citrate
          Effective filtration area (cm²)
          PES: 60.0 PTFE 22.0
          Inlet / outlet
          Inlet: tube ID 4.8 x OD 6.8 Outlet: tube ID 4.8 x OD 6.8
          Length (mm)
          75.0-100.0
          Materials of construction
          Filter media: Hydrophilic HI-FLO PES 0.2 µm and 0.2 µm positive charged, or 1.2 µm, and 5 µm Vent: Hydrophobic PTFE membrane 0.03 µm Housing: Clear Modified Acrylic
          Minimum water bubble point
          0.2 µm: 3.7-4.8 bar (54-70psi)1.2 µm: 0.7-1.0 bar (10-15psi)5.0 µm: 0.15-0.3 bar (2.2-4.5psi)
          Notes
          Self-priming instructionsFor fastest priming procedure. keep Speedflow ULTRA in vertical position with the two vents up. Filtration Capacity 150 lt during 6 hours. tested with fluid composed by 93.6% osmotized water + 6.4 dialysis additives
          Pressure (bar)
          2.0bar (29.00psi)
          Priming volume
          10.3 ml
          Pyrogenicity EU/ml
          <0.25 using the LAL test method
          Sterilization compatibility
          EtO or Gamma (25kGy)
          Temperature
          5 - 40°C
          Water breakthrough
          PTFE Hydrophobic membrane: 3.0bar (43.5psi)
          Weight (g)
          35.8
          Width (mm)
          59
        2. RS075ACYRH002A00
          Speedflow ULTRA 0.2µm PES - IV Vented Adult Filter (PTFE)
          Filtration Efficiency
          100%
          Air flow
          >400 cc/[email protected]
          Bacterial retention
          0.2 µm, 0.2 µm positive charged – 7LRV – Brevundimonas diminuta1.2 µm – Candida albicans
          Biosafety
          Materials comply with USP class VI-121°C test, ISO 10993, REACH, RoHS
          Depth (mm)
          25.4
          Drug compatibility
          Speedflow® ULTRA shows total compatibility with following drugs:5-FlourouracilAmphotericin BBupivacaine HCLDobutamine HCLDopamine HCLInsulinLidocaine HCLNitroglycerinPaclitaxelPiperacillinSodium Citrate
          Effective filtration area (cm²)
          PES: 60.0 PTFE 22.0
          Inlet / outlet
          Inlet: tube ID 4.8 x OD 6.8 Outlet: tube ID 4.8 x OD 6.8
          Length (mm)
          75.0-100.0
          Materials of construction
          Filter media: Hydrophilic HI-FLO PES 0.2 µm and 0.2 µm positive charged, or 1.2 µm, and 5 µm Vent: Hydrophobic PTFE membrane 0.03 µm Housing: Clear Modified Acrylic
          Minimum water bubble point
          0.2 µm: 3.7-4.8 bar (54-70psi)1.2 µm: 0.7-1.0 bar (10-15psi)5.0 µm: 0.15-0.3 bar (2.2-4.5psi)
          Notes
          Self-priming instructionsFor fastest priming procedure. keep Speedflow ULTRA in vertical position with the two vents up. Filtration Capacity 150 lt during 6 hours. tested with fluid composed by 93.6% osmotized water + 6.4 dialysis additives
          Pressure (bar)
          2.0bar (29.00psi)
          Priming volume
          10.3 ml
          Pyrogenicity EU/ml
          <0.25 using the LAL test method
          Sterilization compatibility
          EtO or Gamma (25kGy)
          Temperature
          5 - 40°C
          Water breakthrough
          PTFE Hydrophobic membrane: 3.0bar (43.5psi)
          Weight (g)
          35.8
          Width (mm)
          59
        3. RS075ACYRH012A00
          Speedflow ULTRA 1.2µm PES - IV Vented Adult Filter (PTFE)
          Filtration Efficiency
          100%
          Air flow
          >400 cc/[email protected]
          Bacterial retention
          0.2 µm, 0.2 µm positive charged – 7LRV – Brevundimonas diminuta1.2 µm – Candida albicans
          Biosafety
          Materials comply with USP class VI-121°C test, ISO 10993, REACH, RoHS
          Depth (mm)
          25.4
          Drug compatibility
          Speedflow® ULTRA shows total compatibility with following drugs:5-FlourouracilAmphotericin BBupivacaine HCLDobutamine HCLDopamine HCLInsulinLidocaine HCLNitroglycerinPaclitaxelPiperacillinSodium Citrate
          Effective filtration area (cm²)
          PES: 60.0 PTFE 22.0
          Inlet / outlet
          Inlet: tube ID 4.8 x OD 6.8 Outlet: tube ID 4.8 x OD 6.8
          Length (mm)
          75.0-100.0
          Materials of construction
          Filter media: Hydrophilic HI-FLO PES 0.2 µm and 0.2 µm positive charged, or 1.2 µm, and 5 µm Vent: Hydrophobic PTFE membrane 0.03 µm Housing: Clear Modified Acrylic
          Minimum water bubble point
          0.2 µm: 3.7-4.8 bar (54-70psi)1.2 µm: 0.7-1.0 bar (10-15psi)5.0 µm: 0.15-0.3 bar (2.2-4.5psi)
          Notes
          Self-priming instructionsFor fastest priming procedure. keep Speedflow ULTRA in vertical position with the two vents up. Filtration Capacity 150 lt during 6 hours. tested with fluid composed by 93.6% osmotized water + 6.4 dialysis additives
          Pressure (bar)
          2.0bar (29.00psi)
          Priming volume
          10.3 ml
          Pyrogenicity EU/ml
          <0.25 using the LAL test method
          Sterilization compatibility
          EtO or Gamma (25kGy)
          Temperature
          5 - 40°C
          Water breakthrough
          PTFE Hydrophobic membrane: 3.0bar (43.5psi)
          Weight (g)
          35.8
          Width (mm)
          59
        4. RS075ACYRH050A00
          Speedflow ULTRA 5µm PES - IV Vented Adult Filter (PTFE)
          Filtration Efficiency
          100%
          Air flow
          >400 cc/[email protected]
          Bacterial retention
          0.2 µm, 0.2 µm positive charged – 7LRV – Brevundimonas diminuta1.2 µm – Candida albicans
          Biosafety
          Materials comply with USP class VI-121°C test, ISO 10993, REACH, RoHS
          Depth (mm)
          25.4
          Drug compatibility
          Speedflow® ULTRA shows total compatibility with following drugs:5-FlourouracilAmphotericin BBupivacaine HCLDobutamine HCLDopamine HCLInsulinLidocaine HCLNitroglycerinPaclitaxelPiperacillinSodium Citrate
          Effective filtration area (cm²)
          PES: 60.0 PTFE 22.0
          Inlet / outlet
          Inlet: tube ID 4.8 x OD 6.8 Outlet: tube ID 4.8 x OD 6.8
          Length (mm)
          75.0-100.0
          Materials of construction
          Filter media: Hydrophilic HI-FLO PES 0.2 µm and 0.2 µm positive charged, or 1.2 µm, and 5 µm Vent: Hydrophobic PTFE membrane 0.03 µm Housing: Clear Modified Acrylic
          Minimum water bubble point
          0.2 µm: 3.7-4.8 bar (54-70psi)1.2 µm: 0.7-1.0 bar (10-15psi)5.0 µm: 0.15-0.3 bar (2.2-4.5psi)
          Notes
          Self-priming instructionsFor fastest priming procedure. keep Speedflow ULTRA in vertical position with the two vents up. Filtration Capacity 150 lt during 6 hours. tested with fluid composed by 93.6% osmotized water + 6.4 dialysis additives
          Pressure (bar)
          2.0bar (29.00psi)
          Priming volume
          10.3 ml
          Pyrogenicity EU/ml
          <0.25 using the LAL test method
          Sterilization compatibility
          EtO or Gamma (25kGy)
          Temperature
          5 - 40°C
          Water breakthrough
          PTFE Hydrophobic membrane: 3.0bar (43.5psi)
          Weight (g)
          35.8
          Width (mm)
          59

        Questo sito web utilizza cookie propri e di terze parti per offrire contenuti dinamici e un'esperienza utente più coinvolgente. Consulta la nostra Privacy Policy per maggiori informazioni.